Wiring Antique Brass Flush Mount Ceiling Light
Antique brass flush mount ceiling light – Adding ceiling lighting to your home is a great way to add a little style and flair to your decor. Flush mount ceiling light system is available in many different styles and offers homeowners many options to customize the lighting. Install antique brass flush mount ceiling light need not be difficult, but one of the most important parts of installing lights is wiring the lights to a power switch. Follow these steps to do the job.
Identify wires you will use. An antique brass flush mount ceiling light switch completes or breaks an electrical circuit, so you have to identify where the power comes from and where it is heading. In most homes, wires, cables leading to the switch from a power outlet as part of a circuit, then the switch to the lights. Turn-circuit breaker box. Never work on a live circuit. If you are not sure which switch controls your circuit, turn off the main switch. Strip the insulation on the wires you connect. There will be two white threads and two black cables in use.
12 Photos Gallery of: Wiring Antique Brass Flush Mount Ceiling Light
Strip the cables so that there is 3/8 inch of bare wire exposed on each topic. Connect the white wires together with a wire nut. Put both wires in the wire nut, and then turn the nut until you have a solid relationship. Now connect the black wires to the screw terminals of the switch. Loosen the screws, insert the wires in, and tighten the screws down. Install the switch antique brass flush mount ceiling light in the gang box by screwing the screw tabs and screws. Place your switch plate over the switch, turn the circuit back in, and test operation.