Rustic Ice Chest Design
Rustic ice chest – You can make your own wooden ice chest, but to reduce the likelihood of it leaks or cracks over time, you need to include the comforts of a modern faucet while maintaining a classic, rustic look. Outline a special arrangement of the new wooden coffin. Find an old plastic or metal-framed rustic ice chest to recycle as a new foundation. Choose a model large enough that will meet the needs of the newly built chest. Unscrew the top of the chest from the hinges and lay it aside.
Set the wood around the rustic ice chest, enclosing the frame fully. Using a combination of glue and wood screws to secure the tree on the chest frame. Place a small amount of glue over the area, and then place a board on top of the glue. Screw the boards on the chest with a drill. Place the timber on top of the detached top of the chest. Use small strips of wood to place around the edge of the top.
12 Photos Gallery of: Rustic Ice Chest Design
Unplug the bottom of the radiator, and attach a rubber hose into the drain hole. Allow all the water from the chest to run out, if necessary. Screw the other end of the hose to a water hydrant, and rotate the valve’s knob, so that the water comes out from the tip end. Allow the chest completely fill with water. Place the upper part of the chest back on hinges. Tighten bolts with the wrench used to remove them. Pick up any items that f. ex handles on each side to wear the rustic ice chest frame. Consider the tree of paint, if desired. Sand the wood until it is smooth before painting. After the paint has dried, you can spot on the breast, especially if you want to use it outside.