Make Cabinet Doors Of A Rustic Bookshelf
Rustic bookshelf – A rustic bookshelf can end up looking messy or cluttered if many small items are located on several shelves rustic bookshelf may have. If the rack is your primary source of storage, you can be looking to cover the cluttered shelves with a gate. As the cabinet doors can be expensive if you buy a bespoke door to your specific rack, consider making one yourself. Build your own rustic bookshelf door and custom design it to suit your decor.
Measure the height and width of your shelf with a tape measure. Write the measurements down. Add the 3/4-inch thick plywood sheet down. Use the pencil to draw the rustic bookshelf door using the height and width measurements. Place the plywood sheet to the table saw. Turn the saw on. Cut the big door rectangle. Sandpaper edges. Decide whether you want a big door or two doors that open in the middle. Apply a coat of paint or stain the cabinet door using a brush.
12 Photos Gallery of: Make Cabinet Doors Of A Rustic Bookshelf
Fix the hinges to the cabinet door using the 1/2-inch screws and a screwdriver. If you install a door, attach hinges to a long side distance of at least 4 inches apart. If you install two doors, attach hinges to both doors on one of the long side, distance hinges at least 4 inches apart. Hold one door up to the shelf the book and install it on the bookshelf side panel with hinges inside the rustic bookshelf. Use 1/2-inch screws and screwdriver to install the door. If you install two doors, follow the same instructions, but install a door at a time. Install door handles on cabinet doors using 1-inch screws and screwdriver. The screws must go through the cabinet door from the inside outward to screw sticking out of the handle.