Building Futon Couches Ideas
Futon Couches – A futon couch is designed to operate in an area short on space. The futon converts from a bed to a sofa with just a few movements. When you build your own futon, you have control over the size, material and mattress design. Match the size of the futon sofa frame for the mattress size, which are available in twin, full, queen and king sizes. Suitable wood for this project includes pine, oak, poplar and maple. Use treated and cut pieces to make building easier futon sofa.
To build futon couches drill holes 1 inch from the end of the 2-by-4 boards large enough to slip the bolts through the holes. Four slices have just one hole each, and the remaining two boards have a hole in each end. Place the two boards with holes at each end on a flat work area on the 2-inch side. Space the boards 30 inches apart. Screw a 1-by-3 board 3 inches from the end of the 2-by-4s with an electric screwdriver.
12 Photos Gallery of: Building Futon Couches Ideas
Place two 2-by-4s on their 2-inch sides spaced 26 inches apart futon couches. Screw the first 1-by-3 aboard the 2-by-4s at 3 inches from the end with the holes. Attach the next one-of-3 board to the other end of the 2-by-4s. Screw three more boards between the ends of 1-by-3 boards. Place the central panel on the floor and set the side panels on each end of the center panel. Line up the holes in the 2-by-4 boards. Fill the small gap between the holes with the trays and press the 5-inch bolt through the first hole. Wood a nut on the end of the bolt. Bolt the other ends together. Add futon mattress on the frame and push the sofa mode.