How To Build Rustic Wooden Bench
Rustic wooden bench – While the word “rustic” can have many meanings, when used for the styles of furniture, the most epitome program when it comes to a basic unit is made of natural, virtually untreated wood logs. Working with the unusual shape and increased emphasis claim these pieces of wood requires a shaping approach different techniques used in traditional woodworking.
Halve the log longitudinally on the table saw, which creates a wide, flat edge. Sand the surface cut the top of the log thoroughly using the belt sander. It is the seat of the rustic wooden bench. Cut four thin log pieces for the legs on the table so, each measuring 2 meters long. Use the grinder to cut the ends of the logs in the PEG-shaped points. Make each stick about 3 inches length and 2 inches wide after a short taper. Place the halved log flat side down on the floor or on your desk.
12 Photos Gallery of: How To Build Rustic Wooden Bench
Cut the four 2-inch deep holes in the top of the round log to the legs by means of the drill and spade bit. Placing each hole a foot from the end on each side and about one third of the way between the highest point of the strain curve and the flat bench on each side of the four corners. Fill the holes with wood glue and insert sticks of legs into them. Press hard. Let the glue dry. Strengthen the leg joints with long screws, fixing them at an angle from the ends of the legs up in the rustic wooden bench. Insert one screw for each leg, screw the outer edge of the bench legs inward. Turn off the right side up.Incoming search terms: rustic sectional